Back to top

AKMH Servo Motor

Application area for these motors is the food and beverage industry, without direct contact with unpacked foodstuffs, according to EN 1672-5.3.2. Applications can be cutting, packing and filling without direct contact with foodstuffs. The motor should be placed laterally or below the food. The motors can be mounted to the linear actuators ERD. 

Due to protection class requirements for hygienic applications it is not possible to offer a connector solution for motors. The motors must be ordered with fixed cables and a defined cable length. The motors are available with either one or two fixed cables.

  • The one cable solution supports digital feedback system SFD, SFD3, and HIPERFACE DSL.
  • The two cable solution is necessary for support of Resolver and Comcoder feedbacks.

Part Number Scheme

Technical Data

  • Technical data of all available motor windings can be found in the motor manual.
  • Technical data of the built-in holding brakes are on page Holding Brake.

Resistancy Against Cleaners

AKMH surface is resistant against industrial cleaners.

Standards:  UL, CE, RohS
according to DIN EN ISO 14159 and DIN EN 1672-2
 
Surface:  Stainless steel 1.4404, roughness less than 0.8µm  
Resistancy:  Against tested cleaning agents, corrosion resistant Test Report
Protection class:   IP69K  
Screws: Stainless steel 1.4404, Silicone seal FDA 21 CFR 175.300 FDA Material List
O-Ring: EPDM, FDA 21 CFR 177.2600
Shaft:  Stainless steel 1.4404
Shaft seal:  Mineral filled PTFE, single lip,
mineral: FDA 21 CFR 175.300
PTFE: FDA 21 CFR 177.1500
Lubricant:  food-grade as per FDA 21 CFR 178.3570
Cable gland:  Stainless steel 1.4404, Silicone seal FDA 21 CFR 177.2600
Cable tube:  Silicone FDA 21 CFR 177.2600
Name plate: Laser marked in housing  
Size:  AKMH2 - AKMH6