Back to top

Supported Linear Feedback Devices for AKD / S300 / S700

In order to support linear motors the following linear feedback devices have been tested with our drives:

Manufacturer Model Resolution Signal Period Comment Measuring Standard Abs or Inc Drive
AMO LMKF-111 40 µm 1000 µm sin/cos 1 Vss Inductive measuring principle Incremental S300/S700
Heidenhain LC115 20 µm   EnDat 2.2     AKD, S300/S700
Heidenhain LC181 5 nm (digital)
20 µm (analog)
20 µm EnDat 2.1 / 2.2     AKD, S300/S700
Heidenhain LC181 100 nm (digital)
16 µm (analog)
16 µm EnDat 2.1     AKD, S300/S700
Heidenhain LC183 20 µm   EnDat 2.1   Absolute AKD, S300/S700
Heidenhain LC415 10nm 20 µm EnDat 2.2     AKD, S300/S700
Heidenhain LC483 10 nm (digital)
20 µm (analog)
20 µm EnDat 2.1 / 2.2     AKD, S300/S700
Heidenhain LIC 401x 1 nm   EnDat 2.2 Steel Scale Absolute AKD, S300/S700
Heidenhain LIDA 400   20 µm   Steel Scale Incremental AKD, S300/S700
Heidenhain LS487 20 µm   sealed   Incremental AKD, S300/S700
Heidenhain Sensor: 651871-01
Measuring tape: 681103-XX
    EnDat 2.2   Absolute, optical S300/S701
Jena LIE11 N011 FZ 100 / Quadrant     ROD426 Incremental S300/S700
Jena LIE12 N031 FZ 100 / Quadrant     ROD426 Incremental S300/S700
Renishaw *1 BiSS C LMA10 DC 10B 40 A 03 *1 1,953 µm   Biss Mode C Magnetic Absolute AKD
Renishaw LM10 .24 µm to 250 µm 2 mm   Magnetic Scale 1 mm signal period Incremental AKD, S300/S700
Renishaw RGH24 10 nm to 5 µm 20 µm Exposed Steel Scale 20 µm signal period Incremental AKD, S300/S700
Renishaw RL32 1 nm to 50 nm 1 nm resolution Biss Mode C Reflective Steel Tape Absolute AKD, S300/S700
SICK Stegmann Sensor: TTK70-HXA0-K02
Magnetic tape: MVM-04M-2MC-MKLB (4m)
Cable: DOL-1208-G10MAC1 (10m)
        Absolute S300/S700
SIKO Sensor LE100/1 5VDC 0.3m   Accuracy 0.05mm       S300/S700
SIKO MSA 111C 1000 nm (digital)
1000 µm (analog)
  SSI   Gray code S300/S700
Stegmann TTK70   31250 (nm) Hiperface     S300/S700
Willtec Sensor: EHP1-S-Vpp-1,0-5V
Magnetic tape: PM1-8-P50-1000-DB01
          S300/S700

*1 only supported option - 03 (LOW active status bits)